Insert Trays & Conversion Kit
An insert tray holds 115 pre-roll tubes upright on the King Kone V2™, so the V2 can fill tubes instead of cones. Each tray fits one tube width, from 9 to 14mm.
To make tubes you need three things: the V2™, the 115 Tube Conversion Kit (bought once, works with every insert size) and the insert tray for your tube width.
Which do I need?
| Your tube width | Insert tray |
|---|---|
| 9mm | 9mm Tube Insert Tray |
| 10mm | 10mm Tube Insert Tray |
| 11mm | 11mm Tube Insert Tray |
| 12mm | 12mm Tube Insert Tray |
| 13mm | 13mm Tube Insert Tray |
| 14mm | 14mm Tube Insert Tray |
Every insert tray needs the 115 Tube Conversion Kit, sold separately. One kit works with all six sizes.
- Buy it once
- Needs the Conversion Kit
- Needs the Conversion Kit
- Needs the Conversion Kit
- Needs the Conversion Kit
- Needs the Conversion Kit
- Needs the Conversion Kit
What you need to make tubes
Common questions
No. Buy the 115 Tube Conversion Kit once. It works with every insert tray from 9 to 14mm.
It is the tube size in millimeters, usually listed by your tube supplier. Match it to the insert tray.
For an even fill and pack, add the 115 Tube Metering Tray and the 115 Tube Packing Fingers.
Need a replacement part?
Troughs, plates, power supplies, tray lids and other spare parts for the V2™ and the Closer.