King Kone 115 Tube Conversion Kit for the King Kone V2 pre-roll filling machine
115 Tube Conversion Kit components laid out for commercial tube production
115x Tube Conversion Kit
King Kone 115 Tube Conversion Kit for the King Kone V2 pre-roll filling machine
115 Tube Conversion Kit components laid out for commercial tube production
115x Tube Conversion Kit
King Kone 115 Tube Conversion Kit for the King Kone V2 pre-roll filling machine
115 Tube Conversion Kit components laid out for commercial tube production
115x Tube Conversion Kit

115 Tube Conversion Kit™

1 review
$400.00
$400.00
Shipping calculated at checkout.
  • Turns the V2™ into a tube filler. With an insert tray, the King Kone V2™ fills up to 115 tubes per cycle.
  • Buy it once. One kit works with every insert tray, 9 to 14mm.
  • Insert tray sold separately. Pick the Tube Insert Tray™ that matches your tube width.
  • Run a test batch after converting. It checks the alignment before a full run.
  • 1 × 115 Tube Conversion Kit™

Tube Insert Tray not included.

Compare all insert trays →
Works with every 115 accessory

What you need to make tubes

Tubes on the V2™ need all three. Add the metering tray and packing fingers for an even fill and pack.

King Kone V2™

Fills tubes with the kit

The same V2™ that fills 169 cones fills up to 115 tubes per cycle with the Conversion Kit and an insert tray.

Shop now

115 Tube Conversion Kit™

Buy it once

Turns the V2™ into a 115-tube filler. One kit works with every insert tray, 9 to 14mm.

Shop now

Tube Insert Trays™

One per tube width

Holds 115 tubes upright on the V2™. Pick the tray that matches your tube, 9 to 14mm.

Shop now

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
James
Great product/unanswered solution to inventory

My conversation kit was amazing to go with the king kone machine and other items I purchased. The issue I had was your inventory issue pushed back my production. When I asked for a discount for the two week extra delay I was never responded to. I wanted a discount to purchase more products not a refund.

Thank you for your review and for the kind words about the Tube Conversion Kit. We're thrilled to hear it's been a valuable addition to your production setup.

We also sincerely apologize for the frustration caused by the inventory delay and, more importantly, for not responding to your request. That's not the level of communication or service we strive to provide. Your feedback has been shared with our team as we continue improving both our inventory planning and customer support.

We truly appreciate your business and the opportunity to earn your trust. If you're still interested, we'd be happy to reconnect and discuss your experience. Please feel free to reach out to us at support@kingkoneusa.com.

— The King Kone USA Team

Common questions

Still deciding? Our team can confirm the right setup for your production.

No. Buy the 115 Tube Conversion Kit once. It works with every insert tray from 9 to 14mm.

It is the tube size in millimeters, usually listed by your tube supplier. Match it to the insert tray.

For an even fill and pack, add the 115 Tube Metering Tray and the 115 Tube Packing Fingers.

Pick the fill you want in each tube. If you make more than one fill weight, keep a tray for each.

The trays measure by volume. A finer or drier grind weighs less in the same space, so check a few tubes on a scale.

Yes. Tubes on the V2™ need the 115 Tube Conversion Kit and an insert tray for your tube width.

They are optional. They give a firmer, more even pack after the tubes are filled.

Start with the standard 115 Tube Packing Fingers. Extended is for longer tubes when you want the pack to reach further down.

No. For cones, use the 169 Packing Fingers.