115x .35g Metering Tray
115x .35g Metering Tray
115x .35g Metering Tray

King Kone 115 Tube Metering Tray™ — .35g

$475.00
$475.00
Shipping calculated at checkout.
  • Consistent .35g fills. Every cavity holds the same volume, so fills stay even tray after tray.
  • The lightest fill. The least product per tube of the three trays.
  • Up to 115 tubes per cycle. One cavity over every tube in the insert tray.
  • Less waste. Measured fills mean less product spilled and re-weighed.
  • Measured by volume. The exact weight depends on how fine and how dry your grind is.
  • 1 × 115 Tube Metering Tray™ .35g
  • Fill per tube: about .35g (by volume)
  • Tubes per cycle: up to 115
  • Fits: King Kone V2™ with the Conversion Kit and an insert tray
  • Other fills: .5g · .7g

Not sure which fill? Compare all tube metering trays →
Works with every 115 accessory

What you need to make tubes

Tubes on the V2™ need all three. Add the metering tray and packing fingers for an even fill and pack.

King Kone V2™

Fills tubes with the kit

The same V2™ that fills 169 cones fills up to 115 tubes per cycle with the Conversion Kit and an insert tray.

Shop now

115 Tube Conversion Kit™

Buy it once

Turns the V2™ into a 115-tube filler. One kit works with every insert tray, 9 to 14mm.

Shop now

Tube Insert Trays™

One per tube width

Holds 115 tubes upright on the V2™. Pick the tray that matches your tube, 9 to 14mm.

Shop now

Common questions

Still deciding? Our team can confirm the right setup for your production.

No. Buy the 115 Tube Conversion Kit once. It works with every insert tray from 9 to 14mm.

It is the tube size in millimeters, usually listed by your tube supplier. Match it to the insert tray.

For an even fill and pack, add the 115 Tube Metering Tray and the 115 Tube Packing Fingers.

Pick the fill you want in each tube. If you make more than one fill weight, keep a tray for each.

The trays measure by volume. A finer or drier grind weighs less in the same space, so check a few tubes on a scale.

Yes. Tubes on the V2™ need the 115 Tube Conversion Kit and an insert tray for your tube width.

They are optional. They give a firmer, more even pack after the tubes are filled.

Start with the standard 115 Tube Packing Fingers. Extended is for longer tubes when you want the pack to reach further down.

No. For cones, use the 169 Packing Fingers.