Tube Metering Trays
A tube metering tray sets how much product goes into each tube. It works like the cone Metering Tray, sized for the 115 tubes in the insert tray. Fill the cavities until flush, and every tube gets the same amount.
Which do I need?
| Fill per tube | Tray | Good to know |
|---|---|---|
| .35g | 115 Tube Metering Tray .35g | The lightest fill. |
| .5g | 115 Tube Metering Tray .5g | |
| .7g | 115 Tube Metering Tray .7g | The heaviest fill. |
All three fill up to 115 tubes per cycle on the V2™ with the Conversion Kit. Weights are by volume, so they change with your grind.
.35gStarting at $475
.35g+
.35g
The lightest fill
115tubes per cycle
$475
View product
.5gStarting at $475
.5g+
.5g
The middle fill
115tubes per cycle
$475
View product
.7gStarting at $475
.7g+
.7g
The heaviest fill
115tubes per cycle
$475
View product
Clearing ToolStarting at $400
Clearing Tool+
Clearing Tool
Pushes the product through every cavity into the tubes
115cavities at once
- Fits all three 115 Metering Trays
$400
View product
What you need to make tubes
Common questions
Still deciding? Our team can confirm the right setup for your production.
Pick the fill you want in each tube. If you make more than one fill weight, keep a tray for each.
The trays measure by volume. A finer or drier grind weighs less in the same space, so check a few tubes on a scale.
Yes. Tubes on the V2™ need the 115 Tube Conversion Kit and an insert tray for your tube width.
Need a replacement part?
Troughs, plates, power supplies, tray lids and other spare parts for the V2™ and the Closer.