Metering Trays
A metering tray sets how much product goes into each cone. It sits on the packing tray on the King Kone V2™, with one cavity over every cone. Fill the cavities until the product is flush with the surface, and every cone gets the same amount.
Which do I need?
| Fill per cone | Tray | Good to know |
|---|---|---|
| .35g | 169 Cone Metering Tray .35g | The lightest fill. |
| .5g | 169 Cone Metering Tray .5g | |
| .7g | 169 Cone Metering Tray .7g | The heaviest fill. |
All three fit the King Kone V2™ and fill up to 169 cones per cycle. Weights are by volume, so they change with how fine and how dry your grind is.
- Fits all three 169 Metering Trays
Common questions
Pick the fill you want in each cone. If you make more than one fill weight, keep a tray for each.
The trays measure by volume. A finer or drier grind weighs less in the same space, so check a few cones on a scale and adjust your grind.
Product can jam or settle unevenly in the cavities. The Clearing Tool’s pins push it through, so every cone gets its full fill.
No. These are for 169 cones. For tubes, use the 115 Tube Metering Trays.
Need a replacement part?
Troughs, plates, power supplies, tray lids and other spare parts for the V2™ and the Closer.